IDM Indicator v1.5: Advanced OB & QM Zones
Discover IDM Indicator v1.5 for MT5. Featuring an advanced behavioral Order Block engine, automated QM zones, and multi-timeframe precision counting.

Date: September 2026 | Category: Technical Release Notes
IDM has never told traders what to trade. Its job has always been to lay bare the skeleton of price action so a trader can make that call themselves: which wave the market is in, where liquidity has been engineered, which structural level has been broken, and where the impulsive moves that matter actually began.
Version 1.5 does not change that mission, but it rebuilds the single piece of the indicator that carries the most trading weight — the Order Block — and adds a companion concept, the QM zone, that many structure traders have been drawing by hand for years.
This article walks through what changed and why, without repeating the full parameter reference — that lives in the user guide. Think of it as the release notes a trader actually wants to read.
What's New in IDM 1.5 ?
The problem with the old Order Block
Through version 1.4, IDM found order blocks the same way most indicators do: it scanned forward from the origin of a move for the first three-candle gap — the classic Fair Value Gap pattern — and called that the order block. It worked, and it is now kept around as the “Classic” method for anyone who prefers it. But it had a structural limitation: an FVG is a geometric coincidence between three candles, not a description of what the market actually did. Two setups that looked identical to a human eye could produce different Classic order blocks simply because one had a slightly wider middle candle.
A discretionary structure trader does not look for gaps. They look for the last candle where the market was still undecided before it committed hard enough to break structure. That is a behavioural definition, not a geometric one, and it is what version 1.5's new default method — Advanced — is built around.
1. The Advanced Order Block: a rule built from real candle behaviour
The Advanced method replaces the FVG scan with a candle-by-candle count that runs from the extreme of the leg that produced the break of structure (BOS) up to the BOS candle itself. Described for a bearish break — the bullish case is an exact mirror — the logic is:
Candle 1 is the extreme. It starts as the candle with the highest high of the leg. Any later candle that takes out that high simply becomes the new candle 1.
It rolls instead of resetting. While no candle closes below candle 1's low, the high stays fixed and the low keeps tightening to the lowest low seen so far — the indicator is tracking a zone of indecision, not a single bar.
A two-candle extreme is recognized. If candle 1 is green and is immediately followed by a red candle that does not close below its low, the two candles are treated as one combined extreme, so a top built by a small counter-trend wick does not get lost.
Candle 2 is the first close beyond that range. No colour requirement, no wick requirement — just the first candle whose body closes past the rolled level.
Candle 3 is simply the very next candle. If its wick reaches back into candle 1's range, the whole zone is considered used up, and the count restarts from that candle. If it does not, the zone between candle 1's high and low is confirmed as the order block.
The practical effect is an order block anchored to the last candle the market actually hesitated on, not to whichever three-candle sequence happened to leave a gap. It also means the zone can legitimately “move” forward through a series of failed attempts before it finally holds — which is exactly what happens on a real chart when price keeps probing a level before the break.
See the count for yourself
A new Debug option numbers candles 1, 2, and 3 of the final count directly on the chart, and marks every candle that consumed an earlier zone with a small grey “M”. It turns the rule from something you have to trust into something you can verify on any historical setup.
2. Counting on the right timeframe, not just the chart's
IDM has always been able to tell you the highest timeframe on which a given liquidity sweep is also visible — the “IDM · H4” style labels. Version 1.5 puts that information to work: instead of always counting candles on the chart's own timeframe, the Advanced method counts on the trigger timeframe implied by the IDM's rank.
The mapping follows how traders actually drop down for entries: M5 and M15 IDMs are counted on M1, an H1 IDM on M5, H4 on M15, daily on H1, weekly on H4, and monthly on daily. A break of structure that shows up on an M5 chart but whose IDM only cleared on H1 will have its order block built from M5 candles, not from the coarser M5 bars that would otherwise blur the exact decision point.
This is opt-out, not opt-in — it is on by default because it is simply more accurate — and it degrades gracefully: if the lower-timeframe history required for an old setup is not available in the terminal, the indicator falls back to counting on the chart timeframe and queues a retry once the data arrives.
The practical effect is an order block anchored to the last candle the market actually hesitated on, not to whichever three-candle sequence happened to leave a gap. It also means the zone can legitimately “move” forward through a series of failed attempts before it finally holds — which is exactly what happens on a real chart when price keeps probing a level before the break.
3. The QM zone: trading the failure, not just the break
This is the one genuinely new concept in 1.5, not just a refinement of an existing one. Every correction leg that leads into an IDM also contains an order block of its own — in the opposite direction of the main trend. Under normal conditions, that counter-zone is irrelevant background noise. But if price later breaks through the main order block after the BOS — in other words, if the structure that looked confirmed actually fails — that counter-zone becomes significant: it is the classic Quasimodo pattern's reaction zone.
IDM now computes this zone automatically for every BOS, using the same Advanced three-candle rule run in the opposite direction over the correction leg, on the same trigger timeframe logic described above.
It stays invisible while the trend holds. The moment price crosses back through the main order block, the QM zone is drawn — distinguished from an ordinary order block by a dashed border and a “QM” label — and its own consumption is tracked from that activation point forward, ignoring any earlier, unrelated touches from the original impulse leg.
For traders who already watch for Quasimodo setups by hand, this removes the most tedious part of the process: continuously re-identifying the correction leg's opposite zone every time a structure shows signs of failing.
4. A chart that stays readable when zones overlap
MetaTrader's chart objects have no real transparency, so a chart with several years of order block history quickly turns into a stack of solid rectangles that hide both the candles and each other.
Version 1.5 introduces a “Modern” zone style that solves this without giving up any information:
Live zones are drawn as a body blended from the zone colour and the chart's own background, with a solid coloured border — readable on any background, dark or light.
QM zones use the same body style but a dashed border, so they are never mistaken for a primary order block at a glance.
Consumed zones fade to a very faint grey body with no border at all, so historical, already-traded zones recede visually instead of competing with live ones.
Every zone carries a small label at its right edge naming its type and the trigger timeframe it was built from — for example “OB · M5” or “QM · M1” — and a new setting caps how many live zones per side are drawn at once, always keeping the newest.
Structure labels (IDM, BOS, CHoCH) also got a quiet but useful fix: when two labels would land close together, the second one now steps outward to its own row instead of overlapping the first.
The old solid-block “Filled” style is still available for anyone who prefers it.
5. Running comfortably on fast timeframes
None of the above is free computationally — counting on a trigger timeframe means loading more candles, and QM doubles the zones being tracked. Version 1.5 pairs the new logic with a rewritten calculation pipeline:
The silent structure passes run on the eight higher timeframes are now cached and only recomputed when that timeframe prints a new bar, or at most every few seconds while its live candle is still moving.
Sweep and break resolutions inside two-sided candles are memoised so the same tick range is never re-resolved. Live-candle recalculations are rate-limited so a burst of ticks on M1 cannot overwhelm the terminal.
A companion fix addresses a longstanding annoyance:
Switching timeframes could leave the chart blank if a higher timeframe's history had not finished loading, with no automatic recovery. IDM now retries on a short timer until every timeframe it needs is ready — no manual reload required.
An optional profiling output reports how long each phase of the calculation takes, for anyone tuning a chart with many indicators running at once.
6. A settings panel that explains itself
With order blocks, QM, trigger timeframes, and zone styling all now configurable, the inputs window needed reorganizing.
Every setting in 1.5 is grouped under a numbered category — General, Structure, Order Blocks, Zone Appearance, Market Structure Panel, FVG, Previous D/W/M levels, Colours, and Performance — and every dropdown option carries its own inline description, visible directly in MetaTrader's native settings dialog rather than requiring a trip back to the manual.
What this means if you are upgrading from 1.4
The Advanced method and the QM zone are both on by default, so the zones drawn on your chart will look different immediately after updating — generally tighter and more numerous than before, with QM zones appearing where none existed. This is expected, not a regression.
Anyone who wants to keep the previous visual output exactly as it was can set Detection method to Classic and Zone style to Filled; both remain fully supported.
Everything else — waves, IDM, BOS, CHoCH, the multi-timeframe direction panel, FVG, and the previous Day/Week/Month levels — works exactly as it did in 1.4.
Free Upgrade & Risk-Free Trial
All current license holders will receive this update completely free of charge.
New to IDM Indicator? Experience institutional-grade execution on your own charts, risk-free. Contact our Telegram bot (@AtaQuantBot) today to claim your free trial and see the algorithm in action before making a commitment.


